Siemens SIMOTICS CONNECT 600 Скачать руководство пользователя страница 27

Страница: 27 / 80

Connection

6.1

Only UL version: Opening and closing the sensor box door

For the CE version (CE - Conformité Européenne) of the connectivity module, the sensor box
door has a standard lock.

For the UL version (UL - Underwriters Laboratories) of the connectivity module, in addition to the
standard lock, the sensor box is also equipped with a rotary disconnection device.

Note

Carefully observe the five safety rules (Page 8) when performing any work.

The rotary disconnection device provided in the UL version of the connectivity module is shown
in the following diagram:

①

Rotary disconnection device in the door

②

Rotary disconnection device in the sensor box

Opening the door

1. Turn the rotary disconnection device

①

into the "Off" position.

The sensor box power supply is switched off.

2. Open the sensor box door.

3. To switch on the power supply of the sensor box for commissioning and maintenance work,

turn the rotary disconnection device

②

into the "On" position.

Operating Instructions, 06/2020

Содержание SIMOTICS CONNECT 600

















































































Результаты поиска

Содержание SIMOTICS CONNECT 600

Отзывы:

Похожие инструкции для SIMOTICS CONNECT 600

Бренды по названию

Популярные бренды

Siemens SIMOTICS CONNECT 600, Руководство по эксплуатации

Результаты поиска

Содержание SIMOTICS CONNECT 600

Отзывы:

Похожие инструкции для SIMOTICS CONNECT 600

Бренды по названию

Популярные бренды