Siemens Simogear BA 2331, Перевод оригинальной инструкции по эксплуатации

Страница: 27 / 32

Technical specifications
4.3 Technical specifications of the brake for encoders for functional safety
BA 2331
Operating Instructions, 07/2021, A5E50553480A/RS-AB
25
4.3 Technical specifications of the brake for encoders for functional
safety
The guide values for switching times required for rated operation of the holding brake can be
found in Catalog D50.1 (Chapter 11). These switching times may change as a result of actual
operating conditions and must then be adjusted accordingly.
NOTICE
Air gap check
Air gap check by operator only possible with force-ventilated motors.
NOTICE
Working on the brake
Only Siemens service personnel or personnel trained and authorized by Siemens may carry
out the work on the brake.
Brake type Rated braking
torque T
br
at 100 rpm
Working capacity
until the
maximum air gap
W
V
is reached
Nominal air gap
s
LN
Maximum
air gap s
Lmax
Nm MJ mm mm
L4 (06E) 1.4 46.8 0.2 0.65
2 46.8 0.2 0.6
3 39.6 0.2 0.55
4 36 0.2 0.5
5 23.4 0.2 0.4
L8 (08E) 3 86.4 0.2 0.6
4 86.4 0.2 0.6
5 75.6 0.2 0.6
6.3 75.6 0.2 0.6
8 64.8 0.2 0.5
10 54 0.2 0.5
L16 (10E) 4 108 0.2 0.6
8 108 0.2 0.6
10 108 0.2 0.6
13 108 0.2 0.6
16 108 0.2 0.6
20 80 0.2 0.5