Siemens SIMOGEAR BA 2030 Скачать руководство пользователя страница 92

Страница: 92 / 208

Service and maintenance

8.3 Checking and changing lubricants

BA 2030

Operating Instructions, 02/2021, A5E37880173A/RS-AM

8.3.11

Recommended lubricants

The released and recommended lubricants are listed in the table NT 7300

(

https://support.industry.siemens.com/cs/ww/en/view/109753864

DANGER

Used lubricants only have conditional approval

The used lubricants are not or only conditionally approved for use in the foodstuff or

pharmaceutical industry.
Use only lubricants with USDA (United States Department of Agriculture) H1 / H2 approval

for deployment in the foodstuff or pharmaceutical industry.

NOTICE
Incorrect operating temperatures impair lubricity of the gearbox oil

Operating temperatures outside the permitted range impair the lubricating property of the

gearbox oil.
For this, observe the permissible oil sump temperatures listed in the lubricant table.
The oil used must be approved for use in the ambient temperature range given on the

rating plate.
When changing the oil, please observe the operating temperature range of the new oil as

specified by the oil manufacturer.

Note

As standard, the lubricants and shaft seals are harmonized and coordinated with one another

corresponding to the prevailing operating conditions.
Contact Technical Support for:
•

Change of the operating conditions

•

Change in oil grade

•

Deployment of new shaft seals.

Note

The lubricants used are not at all or only conditionally biodegradable. If biologically

degradable lubricants are required, use only gearbox lubricants with the appropriate

classification listed in the NT 7300 table.

Содержание SIMOGEAR BA 2030

















































































































































































































Результаты поиска

Содержание SIMOGEAR BA 2030

Отзывы:

Похожие инструкции для SIMOGEAR BA 2030

Бренды по названию

Популярные бренды

Siemens SIMOGEAR BA 2030, Перевод оригинальной инструкции по эксплуатации

Результаты поиска

Содержание SIMOGEAR BA 2030

Отзывы:

Похожие инструкции для SIMOGEAR BA 2030

Бренды по названию

Популярные бренды