Siemens SIMEAS R-PMU, Руководство пользователя, Страница: 162 / 296

12
12.12 Transient Analog Recorder (TAR)
162
Digital Fault Recorder, SIMEAS R-PMU, Manual
E50417-H1076-C360-A5, Release 10.2012
12.12 Transient Analog Recorder (TAR)
12.12.1 Time settings
‰
First of all, select the dialog
Transient Analog Recorder
to set the time parameters for the
device.
Figure 12-26 Transient Analog Recorder, time settings
‰
Select the dimension of the run times to be set from the drop-down menu of the
Timebase
box.
For reasons of clarity, all times are displayed in the same unit of time. When the unit of time
is changed, all times will be readjusted.
‰
Enter the recording time of the events preceding the fault in the
Prefault Time
box.
‰
Define the length of a record starting from a specific trigger time in the
Recording Time
box.
‰
Enter the recording time for a manual trigger in the
Recording Time for manual trigger
box.
‰
In the
Retrigger blocking time for analog inputs
you can enter the blocking time for analog
channels. During this period, no other trigger condition is recognized for this channel.
‰
In the
Retrigger blocking time for binary inputs
you can enter the blocking time for binary
channels. During this period, no other trigger condition is recognized for this channel.
‰
In the
Time frame for logical trigger
box, you can enter the interval during which the
conditions for logical operations must be met.
Note
A time must be entered in every input field.