manualshive.com logo in svg

Siemens SIMATIC TS Adapter IE, Руководство пользователя

Поделиться
Скачать
Siemens SIMATIC TS Adapter IE Скачать руководство пользователя страница 89

 

Specifications 

 

9.7 Specification of Insulation Testing, Protection Class and Degree of Protection / Test Voltage 

TS Adapter IE 
Manual, 11/2010, A5E00977705-03 

89

 

9.7

 

Specification of Insulation Testing, Protection Class and Degree of 

Protection / Test Voltage 

Test voltage 

The TS Adapter IE MODEM can also be used in TNV-3-networks. The separation between 

the telephone side and the rest of the electronics was checked during the type test according 

to the requirements set forth in the IEC/EN 60950-1 and UL 60950-1 standards.  

Protection class 

The TS Adapter IE meets the protection type I according to EN 61140:2002 (VDE 0140-1. 
The profile rail or DIN rail on which the TS Adapter IE is mounted has to be grounded. 

Protection against foreign bodies and water 

The TS Adapter IE meets the protection type IP20 according to IEC 60529. 
The TS Adapter IE is protected against contact with standard probes. 
The TS Adapter IE is not protected against water incursion. 

Содержание SIMATIC TS Adapter IE







































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды