Siemens SIMATIC TS Adapter IE Скачать руководство пользователя страница 41

Страница: 41 / 102

Working with the TS Adapter IE

7.4 Setting the PG/PC Interface

TS Adapter IE
Manual, 11/2010, A5E00977705-03

7.4

Setting the PG/PC Interface

Procedure

During installation of the software you are prompted to set the PG/PC interface.
1.

Open the "Set PG/PC interface" dialog box to verify it.
–

If "TS Adapter IE" interface is included in the selection list, go to step 5.

–

If "TS Adapter IE" interface is missing from the list, continue with step 2.

To add or remove interfaces, click "Select...".
The "Install/Remove Interface" dialog box opens.

Select the "TS Adapter IE" module from the selection list and install the adapter.

Click "Close" to close the dialog box.

In the "Set PG/PC interface" dialog box select the TS Adapter IE.

Click "Properties...".
The "Properties - TS Adapter IE" dialog box opens.

Open the "Local Modem" tab. Under "Modem:" choose the modem with which you want

to connect to the TS Adapter IE. For ISDN, select the B-channel protocol X.75, e.g. AVM

ISDN SoftCompression X.75-V.42bis.

Under "Location > Name:" choose the location of your PG/PC. Click "Edit" if needed to

open up the "Phone and Modem Options" dialog box to set up a new location. For more

information on the location, refer to the help for the "Edit location" dialog box.

Click "OK" to exit the "Properties - TS Adapter IE" dialog box.

If you have changed an access path in these settings, a warning message then appears. To

apply the changes, click "OK".

Содержание SIMATIC TS Adapter IE







































































































Результаты поиска

Содержание SIMATIC TS Adapter IE

Отзывы:

Бренды по названию

Популярные бренды

Siemens SIMATIC TS Adapter IE, Руководство пользователя

Результаты поиска

Содержание SIMATIC TS Adapter IE

Отзывы:

Бренды по названию

Популярные бренды