Siemens SIMATIC TS Adapter IE Скачать руководство пользователя страница 18

Страница: 18 / 102

Mounting

4.3 Mounting on DIN Rails

TS Adapter IE

Manual, 11/2010, A5E00977705-03

Mounting TS Adapter IE

Insert the slide from below into the rear panel of the TS Adapter IE.

Attach the TS Adapter IE in the DIN rail

①

Swivel the TS Adapter IE back until the slide engages audibly

②

Figure 4-3

Mounting TS Adapter on DIN rail

Dismounting TS Adapter IE

WARNING

Unplug the connectors from the analog and Ethernet cables of the TS Adapter IE before

dismounting the TS Adapter IE from the grounded profile rail or DIN rail.

You can see the bottom end of the slide on the underside of the TS Adapter IE.
1.

To disengage the latching mechanism, use a screwdriver to pull the slide down.

Swivel the TS Adapter IE forward out of the DIN rail.

Содержание SIMATIC TS Adapter IE







































































































Результаты поиска

Содержание SIMATIC TS Adapter IE

Отзывы:

Бренды по названию

Популярные бренды

Siemens SIMATIC TS Adapter IE, Руководство пользователя

Результаты поиска

Содержание SIMATIC TS Adapter IE

Отзывы:

Бренды по названию

Популярные бренды