Siemens SIMATIC TP700 Comfort Outdoor, Руководство по эксплуатации

Страница: 197 / 232

Technical Support
Comfort Panels
Operating Instructions, 03/2012, A5E03404994-02
197
8.4.3.2 Operating conditions
Mechanical and climatic conditions of use
The HMI device is designed for use in a location protected from the effects of the weather.
The conditions of use meet the requirements for DIN IEC 60721-3-3:
●
Class 3M3 (mechanical requirements)
● Class 3K3 (climatic requirements)
Use with additional measures
The HMI device should not be used at the following locations unless additional measures are
taken:
●
In locations with a high degree of ionizing radiation
● In locations with severe operating conditions, for example, due to:
–
Corrosive vapors, gases, oils or chemicals
– Electrical or magnetic fields of high intensity
● In plants that require special monitoring - for example:
–
Elevators
– Systems in especially hazardous rooms
Mechanical ambient conditions
The mechanical ambient conditions for the HMI device are specified in the following table in
terms of sinusoidal vibration.
Frequency range f
in Hz Constant Occasional
5 Hz ≤ f ≤ 8.4 Hz
1
Amplitude 0.0375 mm Amplitude 0.075 mm
8.4 Hz ≤ f ≤ 150 Hz Constant acceleration 0.5 g Constant acceleration 1 g
1
Frequency range for KP/KTP 400 Comfort: 5 Hz ≤ f ≤ 9 Hz
Reducing vibrations
If the HMI device is subjected to greater shocks or vibrations, you must take appropriate
measures to reduce acceleration or amplitudes.
We recommend mounting the HMI device on damping materials (on rubber-metal vibration
dampers, for example).