Siemens SIMATIC TIM 3V-IE DNP3, Системное руководство

Страница: 262 / 354

Diagnostics and upkeep
7.3 SINAUT diagnostics and service tool
TIM DNP3
262
System Manual, 12/2015, C79000-G8976-C253-04
Operator activities
1. Select a subscriber in the
SINAUT subscriber list
of the open project.
2. Open the
TIM Message Monitor
dialog by selecting the
SINAUT / TIM Message Monitor
menu.
3. In the
Output file
box, enter the name of a file of the type
*.7dt
, in which your recorded
TIM messages will be saved or browse for the directory of the 7dt file in the file tree using
the square button.
4. In the
TIM Message Monitor
dialog, in the
Monitor stop action
area, select one of the
three options for starting message monitoring. If you select manual, you must decide
whether the recorded messages are read by continuous sampling or after stopping
monitoring.
5. Start monitoring with the
Start Monitor
button. The
TIM Message Monitor
progress dialog
opens and displays information on the acquisition mode and the progress of the message
recording over time indicating the elapsed and remaining time. The amount of data read
and data remaining is also displayed.
6. Click on the
End Monitor
button in the
TIM Message Monitor
dialog to stop monitoring
manually.
7. In the next dialog, decide whether you want to read the monitored messages immediately
(the
TIM Message protocol
window opens) or whether you want to read the monitored
messages at a later point in time (you return to the SINAUT subscriber list).
Note
You can open and evaluate the TIM message protocol later using the TIM message
protocol (Page 265) function of the diagnostics and service tool.
7.3.3.5 TD7onTIM diagnostics
Description of the functions
Note
The
TD7onTIM Diagnostics
function is available only for TD7onTIM-compliant TIM modules
on which parameters were set for the
TD7onTIM
software (for example TIM 3V-IE DNP3).
TD7onTIM Diagnostics
provides information on the status of the data transmission of the
TD7onTIM
software of the TIM module selected in the SINAUT subscriber list.
In keeping with the parameter assignment of
TD7onTIM
, the diagnostic functions are
displayed for the following objects:
● Status of system objects
● Status of data objects
● Status of the input and output channels