Siemens SIMATIC TIM 3V-IE DNP3, Системное руководство

Страница: 171 / 354

The SINAUT Configuration Tool
6.6 TD7onTIM
TIM DNP3
System Manual, 12/2015, C79000-G8976-C253-04
171
Entering and saving parameters
To simplify data input, the relevant parameter area is not opened and closed using separate
buttons or menus but is shown automatically.
Entries in the parameter assignment dialogs are adopted immediately with the following
actions:
● Activating or deactivating an option
● Exiting the input box with the mouse or tab key
The entries are applied permanently using the Save function.
6.6.5 Basic settings for subscribers with TD7onTIM
To make the basic settings for the TD7 software of the individual TIM subscribers, you first
select the "TIMs with TD7onTIM" directory in the directory tree. The subscriber list then
displays all the TD7-compliant TIM modules of the project.
The parameter area with the parameters of the TIM selected in the subscriber list opens
below the subscriber list.
Image 6-12 Parameter area with basic settings for the TIM subscriber 1001