Siemens SIMATIC S7-300 FM 350-1, Руководство пользователя

Страница: 182 / 198

Errors and diagnostics
10.4 Operator error
FM 350-1 Counter module
182
Manual, 05/2011, A5E03648639-01
10.4 Operator error
Operator errors events
Operator errors develop as a result of improper operation of the module caused by the
incorrect input of control signals.
Objects which indicate operator errors
FC CNT_CTL1 enter the operator error numbers in the DB. FC CNT_CTL1 sets output
parameter OT_ERR to indicate the occurrence of an operator error. You can access this
data word in your program using the variable identifier `OT_ERR_B'.
Possible operator errors
Table 10- 5 Operator error numbers and their meaning
No. Meaning
0 No error
1 Operating mode can not be started using the SW gate
2 Operating mode can not be canceled
4 Only allowed when the CPU is in STOP
5 Only the parameter assignment control bit may be set
6 Illegal job
10 Undershoot, or load value out of limits.
11 Overshoot, or comparison value 1 out of limits
12 Update time or comparison value 2 out of limits
20 Incorrect configuration of the reaction of DO0
21 Incorrect configuration of the reaction of DO1
22 Pulse duration out of limits
90 See section "The FC CNT_CTL2 function (FC 3) (Page 48)."
91 See section "The FC CNT_CTL2 function (FC 3) (Page 48)."
How to acknowledge operator errors
You acknowledge the error by setting input parameter OT_ERR_A at FC CNT_CTL1.