manualshive.com logo in svg

Siemens SIMATIC S5-95F, Руководство пользователя


Поделиться
Скачать
background image

S5-95F on SINEC L1 

 S5-95F

13.2.1 Initializing the S5-95F for Non-Failsafe Data Interchange

The S5-95F requires the following information in order to interchange data over the L1 channel:

•

The slave number of the S5-95F

•

The location of the Send data (data block or flag area)
Designation: Send Mailbox, abbreviated SF

•

Location of the Receive data (data block or flag area)
Designation: Receive Mailbox, abbreviated EF

•

Storage address for coordination info for transmitting data (e.g. "Send mailbox enabled")
Designation: Coordination Byte Send, abbreviated KBS

•

Storage address for coordination info for receiving data (e.g. "Receive data available")
Designation: Coordination Byte Receive, abbreviated KBE and

•

The programmer bus number assigned to the S5-95F (if programmer functions are to "execute"
over the L1 channel)

This information must either be stored in DB1 or entered using the COM 95F software (refer to the
COM 95F manual).

Proceed as follows to enter the information in DB1:

 

A default DB1 is integrated in the S5-95F's operating system; among other things, this data
block provides parameter default values for transferring data over SINEC L1.
Load the default DB1 into your programmer (transfer function, source: PLC, destination: 
FD (PG))

 

Find the SINEC L1 parameter block; the block name for the PG/OP/SINEC L1 interface socket
is "SL1:".
Note: Use capital letters only!

SL1:

PGN N

SLN N

SL1A:

KBE N

KBS N
.

.

.

SL1B:

KBE N

KBS N

a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a

a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a

a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a

a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a

Start of the SINEC L1 parameter block

a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a

a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a

a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a

a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a

PG bus number parameter

a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a

a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a

a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a

a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a

a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a

a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a

Slave number parameter
(station numbers are for entire S5-95F)

a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a

a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a

a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a

a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a

a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a

a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a

a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a

a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a

Parameter block when subunit A is connected to the SINEC L1
channel

a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a

a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a

a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a

a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a

a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a

a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a

a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a

a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a

Parameter block when subunit B is connected to the SINEC L1
channel

 

Edit the defaults as required; do not change the syntax.
You will find an example on the next page.

 

Transfer the edited DB1 to the PLC; the default DB1 is overwritten with the edited data block.

The new parameters do not go into force until the programmable controller is switched from STOP
to RUN or from POWER OFF to POWER ON.

13-4

EWA 4NEB 812 6210-02

Содержание SIMATIC S5-95F




































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для SIMATIC S5-95F

Falcon RS500 Owner'S And Installer'S Manual preview
RS500
Бренд: Falcon Страницы: 3
OBaby Cobra Instructions For Use Manual preview
Cobra
Бренд: OBaby Страницы: 47
Haier YR-H71 Service Manual preview
YR-H71
Бренд: Haier Страницы: 58
Echelon Excel 50 Installation Instructions Manual preview
Excel 50
Бренд: Echelon Страницы: 40
Wavelink Avalanche User Manual preview
Avalanche
Бренд: Wavelink Страницы: 69
Parkside PDWE 8 A1 Instructions Manual preview
PDWE 8 A1
Бренд: Parkside Страницы: 86
Watts 009 Series Instruction, Installation, Maintenance And Repair Manual preview
009 Series
Бренд: Watts Страницы: 24
Daikin BRC1H61W Installation Manual preview
BRC1H61W
Бренд: Daikin Страницы: 46
Daikin BRC1H61W Installation Handbook preview
BRC1H61W
Бренд: Daikin Страницы: 26
LLURIA LB-ART2 Manual preview
LB-ART2
Бренд: LLURIA Страницы: 2
M-system R5-TS Instruction Manual preview
R5-TS
Бренд: M-system Страницы: 3
IN-COMMAND NCSP35CM Installation And Operation Manual preview
NCSP35CM
Бренд: IN-COMMAND Страницы: 47
SYCLOPE TRACE'O Manual preview
TRACE'O
Бренд: SYCLOPE Страницы: 60
Haes ELAN HS-5100 User Manual preview
ELAN HS-5100
Бренд: Haes Страницы: 42
Anilam 4200T CNC Manual preview
4200T CNC
Бренд: Anilam Страницы: 31
Rinnai MC-91-1US Quick Start Manual preview
MC-91-1US
Бренд: Rinnai Страницы: 7
Objective Imaging OASIS-4i Installation Manual preview
OASIS-4i
Бренд: Objective Imaging Страницы: 11
Samson 3371 Series Mounting And Operating Instructions preview
3371 Series
Бренд: Samson Страницы: 70

Бренды по названию

Популярные бренды

Загрузить еще бренды