Siemens SIMATIC S5-115U, Руководство пользователя

Страница: 459 / 676

S5-115U Manual Communications Capabilities
Mode number
The table below explains the mode numbers. The default refers to word 7 in the ASCII parameter
set (see Table 12-10). The mode numbers must be defined in system data word 55 (see
Section 12.4.5).
Table 12-9. Description of the Mode Numbers
* n is variable when sending
** m is fixed when receiving
*** If a received message frame of m bytes contains a RUB OUT, correspondingly less data is entered in the receive mail-
box and the character delay time activates error 01 in CBR.
Mode Description Default
a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a
a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a
a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a
a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a
a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a
a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a
a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a
Send n bytes; n
*
must be specified in the first word of the Send
mailbox.
Receive m bytes; m
**
is specified in the ASCII parameter set.
none
64
1
Same as mode 2. The following ASCII characters are interpreted upon
reception:
RUB OUT : delete last character
XON
: forward
XOFF : interrupt send and wait for XON
<CR> 4
Send or receive data until the end character (low-order byte) defined
in the parameter set is sent or received. The end character is also
transmitted.
<CR> 2
Send or receive data until the two end characters defined in the
parameter set are sent or received. Both end characters are
transmitted.
End of text is recognized only when the character defined in the
high-order byte is sent or received before the character defined in
the low-order byte.
<CR> <LF> 3
Same as mode 3. The following ASCII characters are interpreted upon
reception:
RUB OUT : delete last character
XON
: forward
XOFF : interrupt send and wait for XON
<CR> <LF> 5
Printer Output
Transmit send mailbox until an end character defined in the
parameter set (low byte) is reached. The end character is not
transmitted.
Only XON and XOFF can be received. These characters are also
interpreted.
<EOT> 6
Printer Output
Send n bytes; n must be specified in the first word of the Send
mailbox. (n is not transmitted.)
Only XON and XOFF can be received. These characters are also
interpreted.
none 7
8
As in mode 1; the following ASCII characters are also interpreted
when received
RUB OUT
***
: delete last character
XON : continue to send
XOFF : abort send and wait for XON
see
Mode 1
EWA 4NEB 811 6130-02b
12-25