manualshive.com logo in svg

Siemens SIMATIC S5-115F, Руководство пользователя


Поделиться
Скачать
background image

Rules Governing the Use of the S5-115F 

 S5-115F Manual

Permissible modules

Module

430-7LA DI 

434-7LA Interrupt DI

435-7LC DI

436-7LC DI

451-7LA DQ

454-7LA DQ

454-7LB DQ

458-7LA Rel DQ

458-7LB Rel DQ

456-7LB DQ

failsafe

failsafe

failsafe

failsafe

reaction-free

reaction-free

reaction-free

reaction-free

failsafe

failsafe

Characteristics

32 *

24 V, Connected to comm. 0 V pot. in

groups of 8, P input

8 *

24 V, Not connected to comm. pot.,

interrupt generating

8 *

115 V, Not connected to comm. pot.

8 *

230 V, Not connected to comm. pot.

32 *

24 V /

0.5 A, Connected to comm.

0 V pot. in groups of
8, P output

16 *

24 V /

2.0 A, Connected to comm.

0 V pot. in groups of
4, P output

8 *

24 V /

2.0 A, Not connected to

comm. pot., P/M
output

16 *

24 V /

0.5 A, Not connected to

comm. pot., relay
output

8 *

60 V /

5.0 A, Not connected to

a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a

a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a

a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a

a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a

a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a

a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a

a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a

10.9.6 Checking Digital Input Modules in the Case of Non-Intermittent Input

Signals

The operating system checks digital input modules. It requires check digital output signals for this
purpose in order to simulate intermittence of safety-related, non-intermittent digital and analog
input signals.

A digital output module (check DQ) generates the check signals. The check signal switches the
sensor supply. The circuit is the same for both the 1- and 2-sensor versions.
A check digital output value is assigned to a 2-channel digital input value for both channels. The
bit numbers of the digital input value and the check digital output value are identical.

If you use sensors that cannot be deactivated, you must also use a relay digital output module to
generate the check signals.

10.9.7 Direct Read Access to DI Modules

If you want to read the value of a DI word/byte, use the L PW, L PY operations. If any input signal
discrepancies are discovered (with reference to subunits A and B), the operating system responds
differently depending on the CPU used.

The operating system distinguishes between accessing interrupt DIs and non-interrupt DIs.
-

In the case of input signal discrepancies on interrupt DIs, the execution time is increased by the
discrepancy analysis. If no errors are detected, the current standard value is output.

-

In the case of non-interrupt DI discrepancies, the last valid standard value is output. The system
does not wait for the discrepancy to disappear.

10-24

EWA 4NEB 811 6148-02

Содержание SIMATIC S5-115F






































































































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для SIMATIC S5-115F

CAME G5000 Installation, Operation And Maintenance Manual preview
G5000
Бренд: CAME Страницы: 32
Babybee Prams Comet Instruction Manual preview
Comet
Бренд: Babybee Prams Страницы: 21
E-fly 100C Operating Manual preview
100C
Бренд: E-fly Страницы: 16
babyzen YOYO User Manual preview
YOYO
Бренд: babyzen Страницы: 11
Camozzi PRE Series Operation And Maintenance Instructions preview
PRE Series
Бренд: Camozzi Страницы: 33
Camozzi K8 Series Use And Maintenance Instructions preview
K8 Series
Бренд: Camozzi Страницы: 2
Camozzi PME Series Operation & Maintenance Instructions Manual preview
PME Series
Бренд: Camozzi Страницы: 64
Nedap WIM Installation Manual preview
WIM
Бренд: Nedap Страницы: 20
Omega PHCN-37 User Manual preview
PHCN-37
Бренд: Omega Страницы: 56
Omega DP25-TC Quick Start Manuals preview
DP25-TC
Бренд: Omega Страницы: 2
Parker AC890PX Series User Mounting And Assembly Instructions preview
AC890PX Series
Бренд: Parker Страницы: 30
Parker Compax3M Series Installation Manual preview
Compax3M Series
Бренд: Parker Страницы: 52
Parker AC30V Series Manual preview
AC30V Series
Бренд: Parker Страницы: 337
SOMFY Situo 1 RTS Installation And Operating Manual preview
Situo 1 RTS
Бренд: SOMFY Страницы: 112
BabyActive BALLERINA User Manual preview
BALLERINA
Бренд: BabyActive Страницы: 4
ISVT IVC3100 Instruction Manual preview
IVC3100
Бренд: ISVT Страницы: 78
Linear Technology LT8610A Demo Manual preview
LT8610A
Бренд: Linear Technology Страницы: 8
Precision PW66 User Manual preview
PW66
Бренд: Precision Страницы: 8

Бренды по названию

Популярные бренды

Загрузить еще бренды