Siemens Simatic RTU3030C, Руководство по эксплуатации

Страница: 36 / 392

Application and functions
1.9 Performance data
RTU303xC
36
Operating Instructions, 06/2019, C79000-G8976-C382-06
1.9 Performance data
Program blocks of the controller
The following number of program block types are available for control tasks:
RTU3030C: 42
RTU3031C: 43
In total, a maximum of 48 program blocks can be created in up to 8 networks. A maximum of
8 program blocks can be created per network.
For a description of the blocks, refer to the section Control functions (Page 24).
Configuration limits for program blocks
The number of configurable program blocks is limited for some types of blocks:
Program block Max. number per block type
Total available 48
Pulse sequence 2
Year timer 8
Astronomical clock 4
Analog value processing 4
Statistics 8
Blocks with time functions use internal timer objects, which are also limited:
Program block Number of timers used internally by a block instance
Total available 50
On-delay 1
Off delay 1
On/off delay 2
Retentive on delay 1
Pulse generator 2
Pulse sequence 1
Random on/off delay 2
Year timer 2
Week timer 2
Astronomical clock 2
Wiping relay 2
Time relay 3