Siemens Simatic RTU3030C, Руководство по эксплуатации

Страница: 179 / 392

Configuration (WBM)
4.19 Tags
RTU303xC
Operating Instructions, 06/2019, C79000-G8976-C382-06
179
Update cycle
● Basic cycle
The basic update cycle is displayed at the top right on the WBM page.
Copy of the process image
● Save to PC
By clicking the button, you can save the current process image as a *.txt file on the
configuration PC.
4.19.2 Configuration of the tags , general parameters
Structure of the WBM pages for tags
The following WBM pages for the tags show a table at the top of the page with all available
tags of the relevant type. The most important parameters are displayed for the configured
tags.
Exceptions: For the internal temperature and the external power supply, you can only create
one tag in each case. On these pages there is no table.
When you open a page in the lower area the parameters of the first tag are shown that you
configure by making entries and selecting options.
Enabling and configuring tags
1. Click on a row in the table at the top of the WBM page
2. Assign the tag a meaningful name in the "Name" input box.
3. Configure the other necessary parameters and save your entries.
General parameters
Some often repeated parameters on the WBM pages of the tags are only described at this
point.