Siemens SIMATIC RF615A, Руководство по эксплуатации

Страница: 12 / 34

Connecting the antenna
4.2 Bending radii and bending cycles of the cable
SIMATIC RF615A
12
Operating Instructions, 09/2018, C79000-G8976-C511-01
4.2 Bending radii and bending cycles of the cable
Table 4- 1 Bending radii and bending cycles of the antenna cable
Cable designa-
tion
Article number Length [m] Cable loss [dB] Bending radius
[mm]
1)
Antenna cable 6GT2815-0BH10 1 0.5 51
Antenna cable 6GT2815-0BH30 3 1 51
Antenna cable
(suitable for drag
chains)
6GT2815-2BH50 5 1.5 44
2)
Antenna cable 6GT2815-1BN10 10 2 77
Antenna cable 6GT2815-0BN10 10 4 51
Antenna cable
(suitable for drag
chains)
6GT2815-2BN15 15 4 44
2)
Antenna cable 6GT2815-0BN20 20 4 77
Antenna cable 6GT2815-0BN40 40 5 77
1)
Permissible minimum bending radius with multiple bending.
2)
With cables capable of being used in drag chains, 100,000 bending cycles at a bending radius of
100 mm and a bend of ± 180° or 3 million torsion cycles with a bend of ± 180° on a cable length of
1 m are permitted.