Configuring with the WBM
6.3 The menu items of the WBM
SIMATIC RF360R
Configuration Manual, 03/2022, C79000-G8976-C629-02
65
With the "Read" button, the data is read from the transponder. The data read from the
transponder is highlighted in red to distinguish it from the data entered manually. If no
values are displayed, this means that no values have yet been read from the transponder.
Click the "Write" button to transfer the changed data to the transponder.
NOTICE
Reading/writing transponder data with an established connection to the controller
Note that, if a connection to the controller is established, the configuration of the reader is
performed via the controller. To enable transponder data to be read/written via the WBM,
the reader must have been correctly initialized beforehand.
6.3.10
The "User management" menu item
In the "User management" menu item, you can enable/disable authentication, create, delete
and edit user profiles and change passwords.
This page is divided into the following areas:
•
User profiles
•
User properties
•
Password
•
Roles
•
Auto logoff
•
Authentication
Figure 6-15 The "User management" menu item
