SIMATIC Rack PC IL 40, Getting Started
A5E00171493-02
1-1
1 Important
Information
1.1 Safety
Instructions
Caution
The safety instructions given on the reverse of the title page of this Getting
Started must be observed. Before expanding your Rack PC IL refer to Chapter 5
in the electronic manual and read the relevant safety instructions.
This device corresponds to the relevant safety measures according to IEC, EN,
VDE, UL, and CSA. If you have questions about the permissibility of the installation
in the designated environment, please contact our service representative.
Installation Notes
Condensation can occur if the device is transported from a cold environment into
the operating area. Wait until the device has adapted to the room temperature and
is completely dry before operating it. Please observe the notes on ambient
conditions in Chapter 6 in the electronic manual and the installation notes in
Section 2.2 of this manual when installing and operating the device. The device is
to be installed so that there is no danger of it falling or of causing damage to itself
or others.
Be sure the fan ventilation slots are open so that a sufficient amount of air can be
drawn in to cool the housing interior.
!
Warning
Take note of the permissible fitting positions without fail when installing the
systems (see Section 2.2).
If the systems are installed in a non-permissible fitting position, the approvals
pursuant to UL 1950 and EN60950 are no longer valid!