manualshive.com logo in svg

Siemens SIMATIC PG 760 PII, Руководство пользователя

Поделиться
Скачать
Siemens SIMATIC PG 760 PII Скачать руководство пользователя страница 21

2-11

PG 760 PII Programming Device
C79000-G7076-C766-01

You can use a number of different hard disk drives in your PG 760 PII. The
memory capacity of the hard disk can be found in the Product Information
Bulletin and BIOS SETUP program.

The hard disk drive is connected to the first IDE interface (primary IDE). A
second drive can also be connected to this interface as a slave.

Whenever the hard disk drive is accessed, the access LED on the front of the unit
lights up.

!

Caution

Risk of data loss and damage to drive!

Drives are sensitive to vibration and shock. Any vibration occurring during
operation can lead to loss of data or damage to the drive.

If you intend to move the unit, switch it off and wait until the drive has come
to a stop (after approximately 20 seconds).

The CD-ROM drive permits easy updating of STEP 5 and STEP 7 software
and of WINDOWS 95. The drive is operated via the second IDE interface
(secondary IDE). A second drive can also be operated on this interface. If the
second drive is a hard disk drive, the CD ROM drive should be set as the
slave, and the hard disk drive as the master.

Chapter 7.5 contains a description, and explains handling.

!

Caution

Risk of data loss and damage to drive!

CD-ROM drives are very sensitive to vibration and shock. Any vibration
occurring during operation can lead to damage to the drive or the data
medium.

The PG 760 PII is equipped with further module slots for the installation of
additional disk drives. For further information, see Chapter 4.5.

Hard Disk Drive

CD-ROM Drive

Additional
Module Slots

Unpacking and Setting Up the PG 760 PII

Содержание SIMATIC PG 760 PII

























































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды