3-17
PG 720 P Programming Device
C79000-G7076-C721-02
3.6
CD-ROM Drive
You can use the CD-ROM drive to display information contained on CDs on
the PG 720. The CD-ROM drive is installed at the back of the PG 720. It is
operated on the same port as the hard disk drive.
Swing the PG 720 into a horizontal position. The CD-ROM drive is now on
the underside of the programming device. Switch the device on. By briefly
pressing the eject button, the drawer springs out slightly. Now pull the drawer
out until it clicks into position.
When you first open the CD-ROM drive, you will find a film sheet in the
drawer, to protect the drive during transport. Remove this sheet. Now insert
the CD in the drawer with the labeling face up, and press it firmly down into
the center of the turntable. To remove the CD, hold it by the edges and pull
upwards.
Push in the drawer until it closes completely. Do not press the eject button.
Note
To avoid too much pressure on the open drawer, always hold the drawer at
the front with one hand when inserting or removing a CD.
The EJECT function offered by various applications for opening the
CD-ROM drawer does not work with this drive.
1
Access display
This display lights up when data are being read.
2
Drawer
This drawer can be opened and closed by hand.
The CD is inserted here.
3
Eject button
This button unlocks the drawer (2) for opening.
4
Emergency eject hole
1
2
3
4
Overview
Opening the
Drawer
Inserting /
Removing CDs
Closing the Drawer
CD-ROM Front
Getting to Know the PG 720
