Siemens SIMATIC PCS 7, Руководство по обслуживанию

Страница: 27 / 146

Start the Import/Export Assistant
● Start the export assistant from BatchCC by selecting the Options > Export menu command.
● Start the import assistant from BatchCC by selecting the Options > Import menu command.
Additional information
● Manual
SIMATIC BATCH
3.2.4.3 How to restore data from a backup
Introduction
You can restore the data from a backup file and update the Batch process cell in the SIMATIC
BATCH Control Center (BatchCC).
Requirement
No Batch process cell is available in the BatchCC.
Reading a backup
1. In BatchCC, select the menu command Options > Restore.
The "Restore" dialog box opens.
2. Select the storage location for the backup file ("...".sbb).
3. Click "Open".
The backup file is loaded.
Updating the Batch process cell
1. Select the Batch process cell in the tree view of BatchCC.
2. Select the menu command Edit > Update Process Cell.
The "Batch Process Cell - ..." dialog box opens.
3. Click "OK".
The "Update Process Cell" dialog box opens.
4. Compare the columns "Current process cell" und "New process cell" line-by-line. Rearrange
them if necessary.
You can find additional information about this in the manual
Process Control System PCS
7; SIMATIC BATCH.
5. Click "OK".
The "Updating Process Cell" dialog box opens and closes automatically when the update
is completed.
Ensuring Availability
3.2 Data backup
Service Support and Diagnostics (V8.2)
Service Manual, 03/2016, A5E36200111-AA
27