Siemens SIMATIC PCS 7 SMART страница 161 Скачать руководство пользователя

Страница: 161 / 210

Procedure

1. Select View > Toolbar > Object Properties.

The "Properties" tab is enabled in the detail field.

2. Select the "Static Text" entry in the "Standard" tab.

The detail view shows the name of the text field and the layer.

3. Switch to the detail view and then double-click the "Static Text 1" field in the "Static" column.

You can now edit text in this field.

4. Enter "Reactor 1" and then press Enter.

This applies the name and displays it in the top line.

Note
If you are working on the drawing board, this name will be displayed as a tooltip whenever

you hover the mouse over the object.

5. Select the Static Text > Font entry in the tree view.
6. Switch to the detail view and then double-click the value "No" for the "Bold" attribute values.

The value changes from "No" to "Yes" and the text is assigned the "Bold" attribute.

7. Close the "Object Properties" dialog box.

Result

All changes are shown.

9.7.5

Step3 - Duplicating the text field

Prerequisites

● The "RMT1.pdl" process picture is open in the Graphics Designer.
● The text field is inserted.
● The settings for text fields have been made.

Procedure

To avoid repeating all the settings you made for the first text field, you can duplicate the existing

text field and overwrite the existing text.
1. Select the text field if it is no longer selected, and select Edit > Duplicate.

The program duplicates the text field.

2. Double-click the text field and change the text to "Reactor 2".

The duplication function automatically applies all other formats.

3. In the "Properties" tab, select "Static Text" and change the object name.
4. Change the object name to "Reactor 2" in the detail view.

Configuring the operator station

9.7 Creating the process picture

PCS 7 SMART Getting Started - Part 1 (V9.0 with APL)

Getting Started, 12/2017, A5E42181435-AA

161

Содержание SIMATIC PCS 7 SMART



















































































































































































































Результаты поиска

Содержание SIMATIC PCS 7 SMART

Отзывы:

Похожие инструкции для SIMATIC PCS 7 SMART

Бренды по названию

Популярные бренды

Siemens SIMATIC PCS 7 SMART, Начало работы

Результаты поиска

Содержание SIMATIC PCS 7 SMART

Отзывы:

Похожие инструкции для SIMATIC PCS 7 SMART

Бренды по названию

Популярные бренды