Siemens SIMATIC PCS 7 OSx Скачать руководство пользователя

Страница: 64 / 232

OSx Station Basics

1-42

SIMATIC PCS 7 OSx 4.1.2 Operator

Identifying Screen Areas (continued)

Use the navigational tools to display menus and lists, choose options, and

enter data into the system.

Pushbuttons

Place the cursor on a pushbutton and select it to display a

menu or another window. When the button text is bold, the pushbutton is

active. When the button text is gray, the operator cannot select the button.

Some buttons have no text or the text is adjacent to the button. Clicking on

the button causes no action when the button is inactive.

Radio Buttons

These are specially linked buttons. When a second button

in the group is selected, the first automatically turns off. As a safeguard, the

operator is always required to confirm a selection by clicking on an

button.

Toggle Buttons

These buttons are not linked. Each one must be clicked

off and on independently; changing the status of one has no effect on the

other.

Text Browsers

These tools allow the operator to see information not

visible in a window. Place the cursor on the bar and slide the bar back and

forth while holding down the left mouse button. The operator can also click

the pointers at each end of the bar groove to display single lines or columns.

Sliders

These tools allow the operator to see an increase or decrease in an

array of values. That is, as the operator moves the slider, the values go up or

down. Place the cursor on the bar and slide the bar back and forth while

holding down the left mouse button.

Data Entry Field

The operator clicks on a field to enter information.

Some windows require an entry in one field before the operator can enter

information in another field. Therefore, if one field does not appear to be

active, move the cursor to the field that precedes it in the window.

NOTE:

Some dialog boxes that appear when the system is in the Operate

state cause the screen to stop updating until the dialog box times out

(approximately 10 seconds) or until the operator closes it. The system

continues to gather data normally.

Using Navigational
Tools to Enter Data

Содержание SIMATIC PCS 7 OSx









































































































































































































































Результаты поиска

Содержание SIMATIC PCS 7 OSx

Отзывы:

Похожие инструкции для SIMATIC PCS 7 OSx

Бренды по названию

Популярные бренды

Siemens SIMATIC PCS 7 OSx, Руководство оператора

Результаты поиска

Содержание SIMATIC PCS 7 OSx

Отзывы:

Похожие инструкции для SIMATIC PCS 7 OSx

Бренды по названию

Популярные бренды