Siemens SIMATIC PCS 7 OSx Скачать руководство пользователя

Страница: 201 / 232

Reports

9-9

SIMATIC PCS 7 OSx 4.1.2 Operator

The Schedule Status field, located in the upper right corner of the Report

Scheduler, identifies whether a given report schedule is currently active or

suspended. You can change the status by toggling the

Active

and

Suspended

radio buttons.

Since the Report Scheduler gives you the option of creating multiple report

schedules, you do not have to suspend one schedule in order to activate

another. However, suspending a schedule is sometimes a useful alternative

to deleting it, in cases where you may wish to use the schedule again later.

You can change the status of a schedule from active to suspended while the

scheduled report is executing. The report executing is not suspended;

however, future reports with assigned repeat times are suspended. No

output is generated for the scheduled future reports since suspending a

schedule makes report execution inactive.

After you toggle the appropriate radio button next to the Schedule Status

field, be sure to click the

Save

button at the bottom of the Report Scheduler

to confirm a change of status.

NOTE:

A report only executes if OSx is in Operate state. A report can be

scheduled in the Offline state; however, a scheduled report will not run

while the system is Offline.

To activate a suspended schedule, choose the schedule, select

Active

, and

click

Save.

Suspending or
Activating a Report

Содержание SIMATIC PCS 7 OSx









































































































































































































































Результаты поиска

Содержание SIMATIC PCS 7 OSx

Отзывы:

Похожие инструкции для SIMATIC PCS 7 OSx

Бренды по названию

Популярные бренды

Siemens SIMATIC PCS 7 OSx, Руководство оператора

Результаты поиска

Содержание SIMATIC PCS 7 OSx

Отзывы:

Похожие инструкции для SIMATIC PCS 7 OSx

Бренды по названию

Популярные бренды