Siemens SIMATIC PCS 7 OSx Скачать руководство пользователя

Страница: 165 / 232

Action Requests

7-13

SIMATIC PCS 7 OSx 4.1.2 Operator

The operator chooses one response from up to four possible options. The

system writes the answer value to the database attribute defined during the

configuration of the action request. The operator should follow these steps:

Read the text of the action request thoroughly.

Select the appropriate response from the options listed at the lower left

of the Action Request Summary. If an error is made, the operator can

select a different choice before committing it.

Enter a comment in the Comment field. The operator has the option of

entering a comment at any time before committing the answer.

Select

Commit

to commit the answer to the system. The value

corresponding to the selected choice is written to the Answer attribute.

Then select

Dismiss

to close the form.

To cancel the answer procedure, select

Dismiss

without first committing

the answer.

NOTE:

If an operator tries to commit a Multi-Choice value that is out of

range (or fails for any other reason), the

Commit failed

error message

appears, and all the other choices are grayed out. The operator must leave
that action request (for example, by selecting

) and return to it (in this

case, by selecting

) before making another selection.

The operator acknowledges that a triggered event has occurred. The

operator should follow these steps:

Read the text of the action request thoroughly.

Select the

Acknowledge

button.

Enter a comment in the Comment field. This step is optional.

Select

Commit

to commit the answer to the system. Then select

Dismiss

to close the form.

To cancel the answer procedure, select

Dismiss

without first committing

the answer.

Multi-Choice

Acknowledge

Содержание SIMATIC PCS 7 OSx









































































































































































































































Результаты поиска

Содержание SIMATIC PCS 7 OSx

Отзывы:

Похожие инструкции для SIMATIC PCS 7 OSx

Бренды по названию

Популярные бренды

Siemens SIMATIC PCS 7 OSx, Руководство оператора

Результаты поиска

Содержание SIMATIC PCS 7 OSx

Отзывы:

Похожие инструкции для SIMATIC PCS 7 OSx

Бренды по названию

Популярные бренды