Siemens SIMATIC PCS 7 OSx Скачать руководство пользователя

Страница: 157 / 232

Action Requests

7-5

SIMATIC PCS 7 OSx 4.1.2 Operator

If an operator chooses to answer an action request and commit the answer

to the database, OSx updates the database, changes the state of the reset

bit from 1 to 0, and records the action on the Operator Change Log. At this

point, the action request is ready to be triggered again when the controller

program requests interaction.

Occasionally, a controller program resets a triggered action request before

the operator has answered it. In this situation, the action request software

removes the request and its corresponding icon from the OSx station and

makes a record of the activity on the Operator Change Log.

During normal operations, one or more action requests can be triggered at

the same time. In most situations, try to configure the requests so they

occur at different times.

NOTE:

In order to answer an action request, the operator must have both

the action request privilege and the privilege to modify the tag attributes

involved. Refer to the chapter on viewing tag information in the

SIMATIC

PCS 7 OSx Process Configuration Manual

to determine which security

privileges allow an operator to modify particular tag attributes.

An operator with the privilege to respond to action requests, but without the

privilege to modify the tag attribute involved, can respond to view-only

action requests.

The engineer can attach an action request to a graphic with the

mini-windows feature. When you enable mini-windows from the Event

Preferences screen, any action request attached to a graphic is displayed in

a list at the lower right of the graphic if the request has been triggered and

not reset or answered. See

page 5-10

for more information.

Action Request
Mini-Windows

Содержание SIMATIC PCS 7 OSx









































































































































































































































Результаты поиска

Содержание SIMATIC PCS 7 OSx

Отзывы:

Похожие инструкции для SIMATIC PCS 7 OSx

Бренды по названию

Популярные бренды

Siemens SIMATIC PCS 7 OSx, Руководство оператора

Результаты поиска

Содержание SIMATIC PCS 7 OSx

Отзывы:

Похожие инструкции для SIMATIC PCS 7 OSx

Бренды по названию

Популярные бренды