Siemens Simatic PC Panel PC 870, Руководство по эксплуатации оборудования

Страница: 26 / 154

Starting Up the Computing Unit Release 11/02
2-2
SIMATIC Panel PC 870 Computing Unit, Equipment Manual
2.1 Unpacking and Checking the Items Delivered
Unpacking the items
Unpack the items delivered to you as follows:
1. Remove the packaging.
2. Do not throw the original packaging away. Keep it in case you have to transport
your PC at some time in the future.
3. Please keep the enclosed documentation in a safe place. You will require it
when you first start up the items delivered to you and it is part of the device.
4. Check the packaging and the package contents for any visible damage.
5. Check the delivered items against the packaging list for completeness. When
doing so, you should also take into observe accessories which you can order
separately.
6. Should you detect any transport damages or inconsistencies between
packaging contents and packaging list, please inform your sales office.
Recording the serial number (SVP number)
7. Record the serial number (SVP number) of the computer unit in the table; the
number is located on the rating plate above the floppy disk drive on the side of
the device.
The repair center can only identify the device by the SVP No. if it is submitted
for repair.
Recording the Microsoft Windows product key of the Certificate of Authenticity
8. Record the Microsoft Windows product key of the Certificate of Authenticity
(COA) in the table; you will need it if the operating system needs to be
reinstalled. The key is to be found on the device.
SVP No.
Order No.
Microsoft Windows product key