Siemens SIMATIC Panel PC 677 Скачать руководство пользователя страница 80

Страница: 80 / 94

Appendix

A.1 Certificates and guidelines

SIMATIC PC Panel PC 677/877, Control Unit

A-2

Operating Instructions, Edition 04/2005, A5E00407724-01

EMC

USA
General

This device complies with Part 15 of the FCC Rules. Operation is subject

to the following two conditions:
1. This device may not cause harmful interferences.
2. This device must accept any interference received, including

intereference that my cause undesired operation.

Shielded Cables

The use of shielded I/O cables is required when connecting this

equipment to any and all optional peripheral or host devices. Failure to do

so may violate FCC rules.

Modifications

Siemens AG is not responsible for any radio television interference

caused by unauthorized modifications of this equipment or the

substitution or attachment of connecting cables and equipment other than

those specified by Siemens AG. The correction of interference caused by

such unauthorized modification, substitution or attachment will be the

responsibility of the user.

Canadian Notice

This class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe B est conformé à la norme NMB-003

du Canada.

A.1.2

Approvals

The control unit has been given the following approvals:

UL 1950

UL 508

CSA

cUL

FCC

Approvals

for ships

Nema 4

Yes

Note
The approval or approbation is located on the rating label. The rating label is described in

the chapter "Planning use."

Содержание SIMATIC Panel PC 677































































































Результаты поиска

Содержание SIMATIC Panel PC 677

Отзывы:

Бренды по названию

Популярные бренды

Siemens SIMATIC Panel PC 677, Руководство по эксплуатации

Результаты поиска

Содержание SIMATIC Panel PC 677

Отзывы:

Бренды по названию

Популярные бренды