Siemens SIMATIC NETRUGGEDCOM RS900W Скачать руководство пользователя

Страница: 6 / 50

Preface

This guide describes the RUGGEDCOM RS900W. It describes the major features of the

device, installation, commissioning and important technical specifications.
It is intended for use by network technical support personnel who are responsible

for the installation, commissioning and maintenance of the device. It is also

recommended for use by network and system planners, system programmers, and

line technicians.

Related Documents

Other documents that may be of interest include:

Document Title

Link

RUGGEDCOM ROS Configuration Manual

https://support.industry.siemens.com/cs/ww/en/

view/109737218

Accessing Documentation

The latest user documentation for RUGGEDCOM RS900W is available online at

https://support.industry.siemens.com

. To request or inquire about a user document,

contact Siemens Customer Support.

Registered Trademarks

RUGGEDCOM®, ROS®, RCDP®, and RUGGEDCOM Discovery Protocol® are registered

trademarks of Siemens Canada Ltd.
Other designations in this manual might be trademarks whose use by third parties

for their own purposes would infringe the rights of the owner.

Warranty

Siemens warrants this product for a period of five (5) years from the date of

purchase, conditional upon the return to factory for maintenance during the

warranty term. This product contains no user-serviceable parts. Attempted service by

unauthorized personnel shall render all warranties null and void. The warranties set

forth in this article are exclusive and are in lieu of all other warranties, performance

guarantees and conditions whether written or oral, statutory, express or implied

(including all warranties and conditions of merchantability and fitness for a particular

purpose, and all warranties and conditions arising from course of dealing or usage

RUGGEDCOM RS900W

Installation Manual, 04/2021, C79000-G8976-1028-13

Содержание SIMATIC NETRUGGEDCOM RS900W



















































Результаты поиска

Содержание SIMATIC NETRUGGEDCOM RS900W

Отзывы:

Похожие инструкции для SIMATIC NETRUGGEDCOM RS900W

Бренды по названию

Популярные бренды

Siemens SIMATIC NETRUGGEDCOM RS900W, Руководство по установке

Результаты поиска

Содержание SIMATIC NETRUGGEDCOM RS900W

Отзывы:

Похожие инструкции для SIMATIC NETRUGGEDCOM RS900W

Бренды по названию

Популярные бренды