Siemens SIMATIC NET страница 55 Скачать руководство пользователя

Страница: 55 / 66

Technical Specifications
5.3 Operating Environment

5.3

Operating Environment

The RUGGEDCOM RX1511 is rated to operate under the following environmental

conditions.

Note

Temperature limits for select line modules may differ from that which can be

withstood by the RUGGEDCOM RX1511. Make sure the selected modules are

rated for the expected environmental conditions before deployment. For more

information, refer to the

RUGGEDCOM RX1511 Series Modules Catalog

Ambient Operating

Temperature

-40 to 85 °C (-40 to 185 °F)

Ambient Storage Temperature

-40 to 85 °C (-40 to 185 °F)

Ambient Relative Humidity

5% to 95%

Maximum Altitude

2000 m (6562 ft)

Measured from a 30 cm (12 in) radius surrounding the center of the enclosure.

Operating temperature may vary based on the limitations of installed SFPs. Refer to the

RUGGEDCOM

SFP Transceivers Catalog

for SFP temperature ratings.

Non-condensing.

5.4

Mechanical Specifications

Weight

Approximately 3.2 kg (7 lb)

Ingress Protection

IP30

Enclosure

Aluminum

5.5

Dimension Drawings

Note

All dimensions are in millimeters, unless otherwise stated.

RUGGEDCOM RX1511

Installation Manual, 04/2021, C79000-G8976-1056-20

Содержание SIMATIC NET



































































Результаты поиска

Содержание SIMATIC NET

Отзывы:

Похожие инструкции для SIMATIC NET

Бренды по названию

Популярные бренды

Siemens SIMATIC NET, Руководство по установке

Результаты поиска

Содержание SIMATIC NET

Отзывы:

Похожие инструкции для SIMATIC NET

Бренды по названию

Популярные бренды