Siemens SIMATIC NET SCALANCE X-200, Руководство по эксплуатации

Страница: 22 / 110

3.2 Product overview
Article numbers
You can find the article numbers of the devices in the section "Introduction (Page 3)".
Unpacking, checking
WARNING
Do not use any parts that show evidence of damage. If you use damaged parts, there is no
guarantee that the device will function according to the specification.
If you use damaged parts, this can lead to the following problems:
• Injury to persons
• Loss of the approvals
• Violation of the EMC regulations
Use only undamaged parts.
1. Make sure that the package is complete.
2. Check all the parts for transport damage.
If the consignment is incomplete or damaged, contact your supplier or your local Siemens office.
Components of the product
The following parts ship with a SCALANCE X-200 IE switch:
• One device
• One 2-pin plug-in terminal block (signaling contact)
• One 4-pin plug-in terminal block (power supply)
• One DVD (configuration manual, operating instructions, SINEC PNI, SNMP OPC profiles)
The following components are supplied with a SCALANCE X-200 IE switch with the PRO
supplement:
• One device
• Protective caps for the data interfaces
• Protective caps for the connectors of the power supply
• One protective cap for the signaling contact
• One DVD (configuration manual, operating instructions, SINEC PNI, SNMP OPC profiles)
The following parts ship with a SCALANCE XF-200IRT IE switch with slots for bus adapters:
• One device
• One 2-pin plug-in terminal block (signaling contact)
Description of the device
3.2 Product overview
SCALANCE X-200
22
Operating Instructions, 11/2021, C79000-G8976-C284-15