Siemens SIMATIC NET SCALANCE W740 Series Скачать руководство пользователя

Страница: 41 / 456

SCALANCE W780/W740 to IEEE 802.11n Web Based Management
Configuration Manual, 08/2018, C79000-G8976-C267-13

Security recommendations

To prevent unauthorized access, note the following security recommendations.

General

●

You should make regular checks to make sure that the device meets these

recommendations and/or other security guidelines.

●

Evaluate your plant as a whole in terms of security. Use a cell protection concept with

suitable products (

https://www.industry.siemens.com/topics/global/en/industrial-

security/pages/default.aspx

●

When the internal and external network are disconnected, an attacker cannot access

internal data from the outside. Therefore operate the device only within a protected

network area.

●

For communication via non-secure networks use additional devices with VPN functionality

to encrypt and authenticate the communication.

●

Terminate management connections correctly (WBM. Telnet, SSH etc.).

Physical access

●

Restrict physical access to the device to qualified personnel.

●

The memory card or the PLUG (C-PLUG, KEY-PLUG, security PLUG) contains sensitive

data such as certificates, keys etc. that can be read out and modified.

Software (security functions)

●

Keep the firmware up to date. Check regularly for security updates of the product.

You will find information on this on the Internet pages "Industrial Security

(

http://www.siemens.com/industrialsecurity

)".

●

Inform yourself regularly about security advisories and bulletins published by Siemens

ProductCERT (

http://www.siemens.com/cert/en/cert-security-advisories.htm

●

Only activate protocols that you really require to use the device.

●

Use the security functions such as address translation with NAT (Network Address

Translation) or NAPT (Network Address Port Translation) to protect receiving ports from

access by third parties.

●

Restrict access to the device with a firewall or rules in an access control list (ACL -

Access Control List).

●

If RADIUS authentication is via remote access, make sure that the communication is

within the secured network area or is via a secure channel.

●

The option of VLAN structuring provides good protection against DoS attacks and

unauthorized access. Check whether this is practical or useful in your environment.

Содержание SIMATIC NET SCALANCE W740 Series









































































































































































































































































































































































































































































Результаты поиска

Содержание SIMATIC NET SCALANCE W740 Series

Отзывы:

Похожие инструкции для SIMATIC NET SCALANCE W740 Series

Бренды по названию

Популярные бренды

Siemens SIMATIC NET SCALANCE W740 Series, Руководство по настройке

Результаты поиска

Содержание SIMATIC NET SCALANCE W740 Series

Отзывы:

Похожие инструкции для SIMATIC NET SCALANCE W740 Series

Бренды по названию

Популярные бренды