Device Management
3
This section describes how to connect to and manage the device.
3.1
Connecting to the Device
The following describes the various methods for accessing the RUGGEDCOM RX5000
console and Web interfaces on the device. For more detailed instructions, refer to the
RUGGEDCOM ROX Configuration Manual
for the RUGGEDCOM RX5000.
Serial Console and Management Ports
Connect a PC or terminal directly to the serial console or management ports to access
the boot-time control and RUGGEDCOM RX5000 interfaces. The serial console port
provides access to RUGGEDCOM RX5000 's console interface, while the management
port provides access to RUGGEDCOM RX5000's console and Web interfaces.
The serial console port implements RS232 DCE (Data Communication Equipment) on
a DB9 connector. The following is the pin-out for the port:
11
5
6
9
Figure 3.1
Serial DB9 Console Port
Pin
Name
Description
1
DCD
Data Carrier
Detect
2
RX
Receive Data
3
TX
Transmit Data
4
DTR
Data Terminal
Ready
5
GND
Signal Ground
6
DSR
Data Set Ready
7
RTS
Request
to Send
8
CTS
Clear To Send
9
Reserved (Do Not Connect)
RUGGEDCOM RX5000
Installation Manual, 01/2021, C79000-G8976-1058-13
19
