Siemens SIMATIC NET RUGGEDCOM RX1510 Скачать руководство пользователя

Страница: 60 / 66

Certification

6.1.3 FCC

6.1.3

FCC

This device has been tested and found to comply with the limits for a Class A digital

device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide

reasonable protection against harmful interference when the equipment is operated

in a commercial environment.
This device generates, uses and can radiate radio frequency energy and, if not

installed and used in accordance with the instruction manual, may cause harmful

interference to radio communications. Operation of this equipment in a residential

area is likely to cause harmful interference in which case users will be required to

correct the interference at their own expense.

Note

Changes or modifications not expressly approved by the party responsible for

compliance could void the user's authority to operate this device.

6.1.4

FDA/CDRH

This device meets the requirements of the following U.S. Food and Drug

Administration (FDA) standard:
• Title 21 Code of Federal Regulations (CFR) – Chapter I – Sub-chapter J –

Radiological Health

6.1.5

ISED

This device is declared by Siemens AG to meet the requirements of the following

ISED (Innovation Science and Economic Development Canada) standard:
• CAN ICES-3 (A)/NMB-3 (A)

6.1.6

ANATEL

This device meets the regulation for certification and approval of products for

telecommunications by Agência Nacional de Telecomunicações (ANATEL) in Brazil:
• Resolução nº 715, de 23 de outubro de 2019
Notices specific to ANATEL:

Note

This equipment is not certified for use on 2G, 3G or 4G LTE networks in Brazil.

Note

This equipment operates on a secondary basis. That is, it is not entitled to protection

against harmful interference, even from the same type of station, and may not cause

interference to systems operating on a primary basis.

RUGGEDCOM RX1510

Installation Manual, 04/2021, C79000-G8976-1055-20

Содержание SIMATIC NET RUGGEDCOM RX1510



































































Результаты поиска

Содержание SIMATIC NET RUGGEDCOM RX1510

Отзывы:

Похожие инструкции для SIMATIC NET RUGGEDCOM RX1510

Бренды по названию

Популярные бренды

Siemens SIMATIC NET RUGGEDCOM RX1510, Руководство по установке

Результаты поиска

Содержание SIMATIC NET RUGGEDCOM RX1510

Отзывы:

Похожие инструкции для SIMATIC NET RUGGEDCOM RX1510

Бренды по названию

Популярные бренды