manualshive.com logo in svg

Siemens SIMATIC NET RUGGEDCOM RX1501, Руководство по установке

Siemens SIMATIC NET RUGGEDCOM RX1501 - надежный коммуникационный коммутатор для промышленных сетей. Пользователи могут бесплатно загрузить Руководство по установке с нашего сайта. manualshive.com. Удобство использования и надежность делают этот продукт идеальным выбором для сетевых операторов.

Поделиться
Скачать
background image

Device Management

3.2 Configuring the Device

Note

Single-mode fiber ports only support Ultra Physical Contact (UPC) cable connectors.

3.2

Configuring the Device

Once the device is installed and connected to the network, it must be configured.

All configuration management is done via the RUGGEDCOM RX1501 interface. For

more information about configuring the device, refer to the "RUGGEDCOM ROX

Configuration Manual" associated with the installed software release.

3.3

Accessing the CompactFlash Card

The RUGGEDCOM RX1501 features a removable CompactFlash (CF) card that stores

configuration files, firmware (active and backup versions), file-based feature keys

and other system files.

NOTICE

Configuration hazard – risk of data corruption/loss

Do not remove or insert the CF card when the device is powered on.

The CF card should only be removed in the following scenarios:
• The chassis is defective (with the exception of power and media modules)
• The CF card is deemed defective or corrupt
• The device is rendered non-functional due to a serious configuration error, data

corruption, or hardware fault

NOTICE

Configuration hazard – risk of data corruption/loss

The following will void the warranty and potentially result in configuration data

corruption/loss:
• Using a CF card not approved by Siemens for use with this device
• Removing the CF card in any scenario other than those described in this section

Inserting the CF card

To insert the CF card into the device, do the following:

NOTICE

The device should only be powered on when the CF card is present.

1. Make sure the device is powered down.

RUGGEDCOM RX1501

Installation Manual, 10/2021, C79000-G8976-1054-21

23

Содержание SIMATIC NET RUGGEDCOM RX1501



























































Отзывы:

Нет отзывов

Похожие инструкции для SIMATIC NET RUGGEDCOM RX1501

Бренды по названию

Популярные бренды

Загрузить еще бренды