Siemens SIMATIC NET RUGGEDCOM RST2228 Скачать руководство пользователя страница 6

Страница: 6 / 58

Preface

This guide describes the RUGGEDCOM RST2228P. It describes the major features of

the device, installation, commissioning and important technical specifications.
It is intended for use by network technical support personnel who are responsible

for the installation, commissioning and maintenance of the device. It is also recom-

mended for use by network and system planners, system programmers, and line

technicians.

Related Documents

Other documents that may be of interest include:
•

RUGGEDCOM RST2228 Configuration Manual [https://support.industry.siemen-

s.com/cs/ww/en/view/109755340]

•

RUGGEDCOM Modules Catalog for RST2228, RST2228P [https://support.indus-

try.siemens.com/cs/ww/en/view/109752858]

Accessing Documentation

The latest user documentation for RUGGEDCOM RST2228P is available online at

https://support.industry.siemens.com

. To request or inquire about a user document,

contact Siemens Customer Support.

Disclaimer of Liability

Siemens has verified the contents of this document against the hardware and/or soft-

ware described. However, deviations between the product and the documentation

may exist.
Siemens shall not be liable for any errors or omissions contained herein or for conse-

quential damages in connection with the furnishing, performance, or use of this ma-

terial.
The information given in this document is reviewed regularly and any necessary cor-

rections will be included in subsequent editions. We appreciate any suggested im-

provements. We reserve the right to make technical improvements without notice.

Registered Trademarks

RUGGEDCOM™ and ROS™ are trademarks of Siemens AG.

RUGGEDCOM RST2228P

Installation Manual, 12/2019, C79000-G8976-1403-05

Содержание SIMATIC NET RUGGEDCOM RST2228



























































Результаты поиска

Содержание SIMATIC NET RUGGEDCOM RST2228

Отзывы:

Похожие инструкции для SIMATIC NET RUGGEDCOM RST2228

Бренды по названию

Популярные бренды

Siemens SIMATIC NET RUGGEDCOM RST2228, Руководство по установке

Результаты поиска

Содержание SIMATIC NET RUGGEDCOM RST2228

Отзывы:

Похожие инструкции для SIMATIC NET RUGGEDCOM RST2228

Бренды по названию

Популярные бренды