Installing the Device
2.3.1 Mounting the Device on a DIN Rail
Note
For detailed dimensions of the device with either DIN rail or panel hardware installed,
refer to
"Dimension Drawings (Page 26)"
2.3.1
Mounting the Device on a DIN Rail
For DIN rail installations, the RUGGEDCOM RS900GPF can be ordered with a DIN rail
adapterthat can be affixed to the back of the chassis. Use the adapter to mount the
device to a standard 35 mm (1.4 in) IEC/EN 60715 or TS35 DIN rail.
Mounting the Device
To mount the device to a DIN rail, do the following:
1. Secure the DIN rail bracket to the back of the device chassis.
2
1
1
DIN Rail Bracket
2
Screw
Figure 2.1
DIN Rail Bracket Assembly
RUGGEDCOM RS900GPF
Installation Manual, 01/2021, C79000-G8976-1353-05
7
