Siemens SIMATIC NET RUGGEDCOM MX5000 Скачать руководство пользователя страница 29

Страница: 29 / 54

Device Management
3.2 Configuring the Device

The management port is a 10/100Base-TX copper Ethernet port with an RJ45

connector. The following is the pin-out for the management port:

Figure 3.2

RJ45 Management Port

Pin

Name

Description

TX+

Transmit Data+

TX-

Transmit Data-

RX+

Receive Data+

Reserved (Do Not Connect)

RX-

Receive Data-

Reserved (Do Not Connect)

Communication Ports

Connect any of the available Ethernet ports on the device to a management

switch and access the RUGGEDCOM MX5000 console and Web interfaces via the

device's IP address. The factory default IP address for the RUGGEDCOM MX5000 is

https://192.168.0.2

For more information about available ports, refer to

Modules

(Page 23)"

Note

Single-mode fiber ports only support Ultra Physical Contact (UPC) cable connectors.

3.2

Configuring the Device

Once the device is installed and connected to the network, it must be configured.

All configuration management is done via the RUGGEDCOM MX5000 interface.

For more information about configuring the device, refer to the

RUGGEDCOM ROX

Configuration Manual

associated with the installed software release.

3.3

Accessing the CompactFlash Card

The RUGGEDCOM MX5000 features a removable CompactFlash (CF) card that stores

configuration files, firmware (active and backup versions), file-based feature keys

and other system files.

NOTICE

Configuration hazard – risk of data corruption/loss

Do not remove or insert the CF card when the device is powered on.

The CF card should only be removed in the following scenarios:
• The chassis is defective (with the exception of power and media modules)

RUGGEDCOM MX5000

Installation Manual, 01/2021, C79000-G8976-1059-13

Содержание SIMATIC NET RUGGEDCOM MX5000























































Результаты поиска

Содержание SIMATIC NET RUGGEDCOM MX5000

Отзывы:

Похожие инструкции для SIMATIC NET RUGGEDCOM MX5000

Бренды по названию

Популярные бренды

Siemens SIMATIC NET RUGGEDCOM MX5000, Руководство по установке

Результаты поиска

Содержание SIMATIC NET RUGGEDCOM MX5000

Отзывы:

Похожие инструкции для SIMATIC NET RUGGEDCOM MX5000

Бренды по названию

Популярные бренды