Certification
6.1.10 Other Approvals
6.1.10
Other Approvals
This device meets the requirements of the following additional standards:
•
IEC 61000-6-2
Electromagnetic Compatibility (EMC) – Part 6-2: Generic Standards – Immunity
for Industrial Environments
6.2
EMC and Environmental Type Tests
The RUGGEDCOM i800 has passed the following EMC and environmental tests.
IEC 61850-3 Type Tests
Test
Description
Test Levels
Enclosure
Contact
± 4 kV
± 8 kV
IEC 61000-4-2
ESD
Enclosure Air
± 8 kV
IEC 61000-4-3
Radiated RFI
Enclosure ports
20 V/m
Signal ports
± 4 kV @ 5 kHz
IEC 61000-4-4
Burst (Fast Transient)
DC Power ports
± 4 kV @ 5 kHz
Signal ports
± 1 kV line-to-earth
IEC 61000-4-5
Surge
DC Power ports
± 0.5 kV line-to-earth/line
Signal ports
DC Power ports
IEC 61000-4-6
Induced (Conducted) RFI
Earth
ground ports
10 V
IEC 61000-4-8
Magnetic Field
Enclosure ports
30 A/m
IEC 61000-4-29
Voltage Dips
DC Power ports 30% reduction for 0.3 seconds
60% reduction for 1 second
Signal ports
2.5 kV common, 1 kV
differential mode @ 1 MHz
IEC 61000-4-12
Damped Oscillatory
DC Power ports
2.5 kV common, 1 kV
differential mode @ 1 MHz
Signal ports
10 V Continuous, 100 V for 1 s
IEC 61000-4-16
Mains Frequency Voltage
DC Power ports 10 V Continuous, 100 V for 1 s
IEC 61000-4-17
Ripple on DC Power Supply
DC Power ports
± 15%
IEEE 1613 EMC Immunity Type Tests
Description
Test Levels
Enclosure Contact
± 8 kV
ESD
Enclosure Air
± 8 kV
Radiated RFI
Enclosure ports
35 V/m
RUGGEDCOM i800
Installation Manual, 01/2021, C79000-G8976-1002-06
27