Siemens SIMATIC NET CP 243-1 страница 22 Скачать руководство пользователя

Страница: 22 / 142

Application and properties

1.6 IT communication

CP 243-1

Operating Instructions, 03/2012, C79000-G8976-C244-02

●

E-mail number:
This number can be used by the S7-200 user program to reference a configured e-mail.

●

Recipient address:
The e-mail address of the recipient. This address must always be specified.

●

Additional recipient address:
The address of a recipient that will receive a copy of the e-mail. This address does not

have to be specified.

●

Subject:
A short description of the e-mail. The subject must always be specified.

●

E-mail text incl. placeholders and formatting characters:
The actual information to be transferred is located here.

Each address field may only contain one recipient address. If an e-mail needs to be sent to

several recipients, a distribution list must be set up on the e-mail server and this list must be

specified as the e-mail recipient.
In addition to the control characters for the placeholders of data values, the following

formatting characters are supported in the e-mail text:
●

\nline feed

●

\ttab

Note
The maximum length of the e-mail text of 1024 characters relates to the actual message

text including all embedded placeholders and all formatting characters ("\n" and "\t").
If the maximum permitted length of 1024 characters is exceeded when the placeholders

are replaced by values, the e-mail text is truncated after 1024 characters and an error

message to this effect is returned. The truncated e-mail is nevertheless sent.

Conversion procedures such as MIME or UUENCODE are not supported. It is also not

possible to add attachments such as files to e-mails.
The e-mail function of the CP 243-1 can always be enabled or disabled in the configuration.

Communications partners

In addition to conventional PCs, it is possible in principle to specify any terminal with e-mail

capability as the e-mail recipient (for example cell phones or FAX machines).

Performance/constraints

Sending of e-mails is subordinate to S7 communication.

Содержание SIMATIC NET CP 243-1















































































































































Результаты поиска

Содержание SIMATIC NET CP 243-1

Отзывы:

Похожие инструкции для SIMATIC NET CP 243-1

Бренды по названию

Популярные бренды

Siemens SIMATIC NET CP 243-1, Руководство по эксплуатации

Результаты поиска

Содержание SIMATIC NET CP 243-1

Отзывы:

Похожие инструкции для SIMATIC NET CP 243-1

Бренды по названию

Популярные бренды