44
Industrial Ethernet Wireless LAN Radio Link Module RLM
C79000-G8976-C170-01
%
5/06WDUWXS&RQILJXUDWLRQ
Your AccessPoint RLM comes with the access point operating software
factory installed. Together with this software, the access point has also been
loaded with a factory-set configuration, that allows for ‘out-of-the box’
operation.
127(
i
The ‘factory-set’ configuration should not be confused with a
‘default’ configuration. For example, the device will NOT return to
the ‘factory-set’ configuration, but to the ‘default’ configuration,
when performing a ‘reboot’ or ‘forced reload’ (as described in the
“Industrial Ethernet Wireless LAN RLM Manager, CP 1515
Manager” provided on the CD-ROM).
To connect to a RLM, the parameters of each wireless station should be
configured to match the values as identified for the RLM.
•
When powering up the access point for the very first time, these values
should match the values listed in
•
For normal operation these values should match the ones you identified
when configuring the access point. You are advised to record this
information on the Access Point Configuration Record in this appendix.
