Siemens SIMATIC MV500 Скачать руководство пользователя страница 206

Страница: 206 / 294

Process interfacing via an automation system (PLC, PC)

9.7 Scanner portal application

SIMATIC MV500

206

Operating Instructions, 03/2021, C79000-G8976-C494-05

multiple read results. The master reader itself is also a slave that searches for 1D/2D codes in

the field of view.

Restrictions of the scanner portal application

The scanner portal application is subject to the following restrictions:
•

All optical readers must operate in the untriggered image acquisition mode "Auto-trigger".

•

If several different 1D/2D codes with identical contents are read one after the other, the

content is output only once.

•

The master reader can only output the synchronized result via the TCP interface.

•

The formatting options of the result string of the master reader are restricted.

•

A maximum of five optical readers (4 slaves, 1 master) are supported.

•

If a slave reader is in an error state, the master reader does not change to an error state.

•

The master reader does not monitor the number of connected slave readers.

•

Maximum results of 2048 characters including a formatting instruction required for

synchronization can be synchronized.

9.7.1

Configuration

The WBM configuration for the optical readers if you want to set up a scanner portal with

them is described below. A distinction is made between master device and slave devices for

the configuration.

Configuration of the master device

Make the following settings in the WBM for the master device:
•

Menu: "Program > Image acquisition > Trigger"
To control the image acquisition, select the mode "Auto-trigger" (without "Initial trigger").

Make sure to enter the value "1" in the "Recognize double read" input box.
The acquisition interval must be sufficiently long for the 1D/2D codes in the image to be

read. The interval must be identical on all slave and master devices.

•

Menu: "Program > Result > Program format text"
Enter the value "\

02[CamId]

\03%s\04" in the "Format text" input box.

–

[CamId] can be selected freely and is used to identify the optical reader that read the

1/2D code in the field of view.

–

The value "\02\03%s\04" is also allowed if no identification of the optical reader is

desired in the result output.

•

Menu: "Settings > Communication > Interfaces > TCP"

–

Enter the IP address of the TCP partner of the master device.

–

Enter the port number of the TCP partner of the master device.

Содержание SIMATIC MV500







































































































































































































































































































Результаты поиска

Содержание SIMATIC MV500

Отзывы:

Siemens SIMATIC MV500, Руководство по эксплуатации, Страница: 206 / 294

Результаты поиска

Содержание SIMATIC MV500

Отзывы: