Siemens SIMATIC MV500 Скачать руководство пользователя страница 201

Страница: 201 / 294

Process interfacing via an automation system (PLC, PC)

9.6 Control via TCP/IP and RS232

SIMATIC MV500
Operating Instructions, 03/2021, C79000-G8976-C494-05

201

9.6.5

Select program number

This command changes the program or switches to the processing mode with the specified

program number, provided this was assigned.

String

"MR<programnr>" (Machine command Run program <programnr>)

Table 9- 56 String structure

Characters

Description

Number of the program saved.
•

Two printable ASCII characters with the value "0" to "9".

•

Valid range of values: 00 ... 15.

This command returns no response string.
•

Using the "Query status" command, you then check if the

program change has been successful. If, for example, pro-

gram number "5" is selected and the status is queried, the

string "MR05MGST" can be sent.

•

Using <statusbyte> and <currentcodeno>, you can check

whether the optical reader is in processing mode with the

new program number.

If the DISA bit is not set already, the optical reader will set it au-

tomatically to save the program and then reset it.

9.6.6

Save program with internal trigger

Note
Requirement

To be able to execute this command, you first have to configure the identical transport

connection as the trigger and control source.

This command starts the program saving procedure and internally generates a trigger for

image acquisition. The code is saved with the specified number.
Note that if a program has already been saved with this number and no error occurred during

the save procedure, this program is overwritten. If the save procedure is successful, the

optical reader then goes into processing mode with the relevant program number.

Содержание SIMATIC MV500







































































































































































































































































































Результаты поиска

Содержание SIMATIC MV500

Отзывы:

Siemens SIMATIC MV500, Руководство по эксплуатации, Страница: 201 / 294

Результаты поиска

Содержание SIMATIC MV500

Отзывы: