Siemens SIMATIC MV500 Скачать руководство пользователя страница 143

Страница: 143 / 294

SIMATIC MV500
Operating Instructions, 03/2021, C79000-G8976-C494-05

143

Operator control and monitoring

The MV500 optical readers are equipped with a Web server that provides Web-Based

Management (WBM). You can set up and configure your readers using the WBM. You can

create reader-specific programs and program sequences and perform diagnostics, among

other things.

The connection is via Ethernet. The WBM can be accessed via a Web browser, such as Google

Chrome or Microsoft Edge.
This device version has the following advantages:
•

You do not have to install the software on your PC.

•

You can start the WBM from any PC.

•

The WBM is always designed to fit your optical reader. This means that no version conflicts

occur.

Starting WBM

Start the WBM as described in the section "Connecting and setting up the reader (Page 132)".

Содержание SIMATIC MV500







































































































































































































































































































Результаты поиска

Содержание SIMATIC MV500

Отзывы:

Siemens SIMATIC MV500, Руководство по эксплуатации, Страница: 143 / 294

Результаты поиска

Содержание SIMATIC MV500

Отзывы: