Siemens SIMATIC MV500 Скачать руководство пользователя

Страница: 137 / 294

Commissioning

7.5 Transferring optional licenses

SIMATIC MV500
Operating Instructions, 03/2021, C79000-G8976-C494-05

137

To align and configure the reader, follow these steps:
1.

Position the optical reader so that the code to be read appears in the center of the image

and is focused sharply.

Click the "Full program" button to automatically generate a basic configuration of all relevant

parameters for simple reading tasks.
If necessary, you can also restart individual steps in the "Auto-setup" group, or you can set

individual parameters manually in the WBM.

Note
Automatic exposure

If the parameter "Exposure = Auto" is set, the code must be completely in the image after

the triggering until the automatic exposure is completed (approximate value: 50 ms).

Check the read result by enabling the "Formation of result" parameter in the "Result view"

group ("Application > Program").

Save the settings using the "Save program" or "Save program as" button.

Result

The optical reader has been commissioned successfully. Then you can read codes for your

application, make special settings and save them under individual programs.

Note
Access online help with the "?" button

In the WBM, you can use the "?" button at the top right to access the online help at any time.

The online help opens with the context-sensitive help text relating to your current task.

7.5

Transferring optional licenses

7.5.1

Installing a license

Procedure

Proceed as follows to transfer an optional license to an optical reader:
1.

Install the "Automation License Manager".

Install the MV plug-in for code reader devices.

Transfer a license to an optical reader.

Содержание SIMATIC MV500







































































































































































































































































































Результаты поиска

Содержание SIMATIC MV500

Отзывы:

Похожие инструкции для SIMATIC MV500

Бренды по названию

Популярные бренды

Siemens SIMATIC MV500, Руководство по эксплуатации

Результаты поиска

Содержание SIMATIC MV500

Отзывы:

Похожие инструкции для SIMATIC MV500

Бренды по названию

Популярные бренды