Siemens SIMATIC IPC677D, Руководство по эксплуатации

Страница: 87 / 196

Maintaining and servicing your device
7.3 Service and spare parts
SIMATIC IPC677D
Operating Instructions, 09/2014, A5E32995420-AC
87
WARNING
Risk of explosion and release of harmful substances
Improper handling of lithium batteries can result in an explosion of the batteries. Explosion
of the batteries and the released pollutants can cause severe physical injury.
Observe all safety and handling instructions for lithium batteries. Do not expose lithium
batteries to flames and do not solder the battery cell. Do not recharge, open, or short
lithium batteries. Do not reverse lithium battery polarity or heat the batteries to over 100°C.
Keep lithium batteries out of direct sunlight and protect them from moisture and
condensation.
Note the following when handling lithium batteries:
● An empty battery jeopardizes the function of the device. Charge the battery in good time.
● Replace lithium batteries only with batteries of the same type or a type recommended by
the manufacturer.
The order number for the lithium battery is A5E00331143.
NOTICE
Batteries and rechargeables pollute the environment
Do not dispose of used batteries or rechargeables in household waste. Users are obliged
by law to return used batteries and rechargeable batteries. You as the user are legally
responsible disposing used batteries or rechargeables in a correct manner.
Observe the following rules for the disposal of batteries and rechargeables:
• Dispose of used batteries and rechargeable batteries separately as hazardous waste in
accordance with local regulations.
•
You can take used batteries and rechargeable batteries to public collection points and
wherever batteries and rechargeable batteries of the type in question are sold.
• Mark used battery containers as "Used batteries".
Limitation of liability
All technical specifications and approvals for the device apply only if you use expansion
components that have a valid CE approval (CE marking). The installation instructions for
expansion components in the associated documentation must be observed.
UL approval of the device only applies when the UL-approved components are used
according to their "Conditions of Acceptability".
We are not liable for functional limitations caused by the use of third-party devices or
components.
See also
Spare parts and repairs ( http://support.automation.siemens.com/WW/view/en/16611927 )