Siemens SIMATIC IPC547E Скачать руководство пользователя страница 99

Страница: 99 / 154

Device maintenance and repair

7.5 Installing the software

SIMATIC IPC547E
Operating Instructions, 02/2014, A5E32317120-AB

7.5.2

Updating the operating system

Windows

The latest updates for the Windows operating system are available on the Internet at

Microsoft (

http://www.microsoft.com

) and on the device in the Start menu "Start > All

Programs > Windows Update > Check for updates".

Note
Before you install new drivers or operating system updates for Windows MUI versions,

configure the regional menu and dialog settings and the default English (US) language.

other operating systems

Contact the corresponding manufacturer.

7.5.3

Installing drivers and software

Requirement

You need the "Documentation and Drivers" DVD included in the scope of delivery to install

Windows drivers.

Procedure

Installing drivers
1.

If your device has no DVD drive, connect an external USB DVD drive to a USB port.

Insert the supplied "Documentation and Drivers" DVD.

Start the "Start" program.

Select "Drivers" from the index.

Select the device and operating system.

Select the required driver.

Open the folder with the driver data. Click on the link next to "driver path".

Start the setup program in this folder.

Note
The driver for the chipset has to be installed before all other drivers with a new installation

of Windows Server 2008 R2 or Windows 7. Then you can install the drivers of all other

devices.

Содержание SIMATIC IPC547E



























































































































































Результаты поиска

Содержание SIMATIC IPC547E

Отзывы:

Бренды по названию

Популярные бренды

Siemens SIMATIC IPC547E, Руководство по эксплуатации

Результаты поиска

Содержание SIMATIC IPC547E

Отзывы:

Бренды по названию

Популярные бренды