Siemens SIMATIC IPC547D Скачать руководство пользователя страница 78

Страница: 78 / 138

Device maintenance and repair

7.2 Installing the software

SIMATIC IPC547D

Operating Instructions, 06/2011, A5E03473780-01

Retrieving authorizations or license keys from the hard disk

●

Check whether you can retrieve your authorization or license key from the hard disk and

perform this procedure if possible.

●

If backup is not possible, please contact Customer Support. There you can obtain

information necessary for software authorization.

CAUTION

If "Restore system partition only" is set all data on drive C: (system partition) will be

deleted. All data, user settings and all authorizations or license keys on drive C: are lost!

All data on drive C: of the hard disk will be deleted. Setup formats the hard disk and

installs the original factory software.
If "Restore entire hard disk" is set ALL data, user settings, authorizations or license keys

will be lost on the hard disk.

Procedure

Insert the Restore DVD into the DVD drive.

Restart the device with the on/off button.

Press the <F12> key when the following BIOS message appears.

Press <F2> to go to Setup Utility

Press <F12> to go to Boot Manager

The "Boot Menu" is displayed when initialization is completed.

Select the optical drive with your cursor keys which is identified with a "P" in front of the

SATA port number.
Example:

P3 - OPTIARC DVD-ROM DDU1681S

Follow the on-screen instructions.

CAUTION

All existing data, programs, user settings, authorizations and license keys on the drives

will be deleted and are thereby lost.

Содержание SIMATIC IPC547D











































































































































Результаты поиска

Содержание SIMATIC IPC547D

Отзывы:

Похожие инструкции для SIMATIC IPC547D

Бренды по названию

Популярные бренды

Siemens SIMATIC IPC547D, Руководство по эксплуатации

Результаты поиска

Содержание SIMATIC IPC547D

Отзывы:

Похожие инструкции для SIMATIC IPC547D

Бренды по названию

Популярные бренды