Siemens SIMATIC IPC547D Скачать руководство пользователя страница 73

Страница: 73 / 138

Device maintenance and repair

7.1 Removing and installing hardware components

SIMATIC IPC547D
Operating Instructions, 06/2011, A5E03473780-01

Procedure

Remove the modules of the

redundant power supply.

Remove the power supply cables for

the drives and the motherboard from

the housing of the redundant power

supply.

Remove the cable ties securing the

power cables in the housing.

Remove the screws

①

Remove the highlighted screws

②

Remove the housing of the

redundant power supply from the

device.

7.1.9

Removing the motherboard

Requirement

●

The device is disconnected from the power network.

●

The device is opened.

●

A motherboard
The motherboard as spare part is supplied without processor and memory modules.

Procedure

Remove the modules from the slots.

Note the assignment of all cables to the motherboard.

Содержание SIMATIC IPC547D











































































































































Результаты поиска

Содержание SIMATIC IPC547D

Отзывы:

Похожие инструкции для SIMATIC IPC547D

Бренды по названию

Популярные бренды

Siemens SIMATIC IPC547D, Руководство по эксплуатации

Результаты поиска

Содержание SIMATIC IPC547D

Отзывы:

Похожие инструкции для SIMATIC IPC547D

Бренды по названию

Популярные бренды